Briquettes are produced for machining of hard, low-hard and both high and low abrasive rocks of average and low durability. Briquettes are made of synthetic and natural diamond powders.
D | L | W | T |
---|---|---|---|
250 | 24 | 2.5 | 7 |
300 | 24 | 3 | 7 |
300 | 24 | 4 | 7 |
350 | 40 | 3 | 7 |
400 | 40 | 3.5 | 7 |
500 | 40 | 4 | 7 |
600 | 40 | 5 | 7 |
500 | 40 | 5.5 | 7 |
600 | 40 | 6 | 7 |
1000 | 24 | 7 | 7 |
1200 | 24 | 7.5 | 7 |
1250 | 24 | 7.5 | 7 |
1500 | 24 | 8.5 | 7 |
Special | |||
1000 -- 1500 | 24 | 7 | 8 |
24 | 8 | 8 | |
24 | 8 | 10 | |
24 | 8.5 | 8 | |
24 | 9.5 | 10 | |
24 | 10 | 10 | |
24 | 10 | 12 | |
24 | 11 | 10 | |
40 | 6 | 10 | |
40 | 5.5 | 10 |
Order Example | Segment | 24x7x7 | D501 | M | C50 |
Main Symbols | |
---|---|
Relative Concentration | |
Metal Bond | |
Bakelite Bond | |
Process with Cooling |
Symbols of sizes | |
---|---|
D, D1 | Diameter, mm |
H | Tool bore, mm |
T | Height, mm |
X | Thickness of diamond layer, mm |
W, U | Width of diamond layer, mm |
V° | Angle |
R | Radius, mm |
L | Length, mm |
H | Tapped hole, mm |
E | Body Thickness, mm |
S | Glass Thickness, mm |
N | Quantity of segments, pcs |